In-House Preparation of TLC Plates
Automatic TLC Plate Coater
the glass plates to be coated are conveyed underneath a hopper filled with the absorbent suspension. The later thickness is determined by either a fixed gate with pre-set spacers or by a gate with adjustable distance. The plates are moved by a motorized conveying system at a uniform feeding rate of 10 cm/s, to ensure a uniform later. The Automatic TLC Plate Coater is supplied with a fixed gate for pre-set layers of 300 and 500 microns, an adjustable gate for layer thicknesses 0-2 mm, and one plate holder for eight 20X20 cm plates
TLC Plate Coater, Hand Operated
The manual plate coater functions in the same manner as the automatic coater, except with this model the plates are pushed through by hand, one after the other and lifted off on the other side. The TLC Plate Coater is shipped with a fixed gate for pre-set layers of 300 and 500 microns and an adjustable gate for layer thickness 0-2 mm.
Other Products